Family of Chillers
Anatomy4.PDF (369KB) Download time approximately
2.85 minuets with 28800 modem.
Package Chillers (MCP Series)
Well suited for operations that
have variable liquid flow needs. No liquid bypass
required. Can be installed inside or outside. Pump, Tank, Refrigeration Coil, and
Condensing unit all in one package. Compact in sizes for in plant installations. Easy to
install, just hook up liquid lines (in and out), make up connection, and electrical
supply. Available in sizes 2 through 20 ton. Low ambient controls for operation down
to - 40°F. available.
Package 2-Stage Chillers (MCPXX2X
Series)
Well suited for operations that have variable liquid flow needs. No liquid bypass required. Can
be installed inside or outside. Pump, Tank, Refrigeration Coil, and Condensing unit all in
one package. 2-Stage chillers offer lower operating costs and redundancy. Compact in sizes
for in plant installations. Easy to install, just hook up liquid lines (in and out), make
up connection, and electrical supply. Available in sizes 6 through 10 ton. Low ambient
controls for operation down to - 40°F. available.
Package Side
by Side Chillers (MCPS
Series)
Well suited for
operations that have variable liquid flow needs. No liquid bypass required. Can be
installed inside or outside. , and Condensing unit all in one package. Compact in sizes,
well suited for roof installation (2 - 10 ton only 48" high). Easy to install, just
hook up liquid lines (in and out), make up connection, and electrical supply. Available in
sizes 2 through 60 ton. Low ambient controls for operation down to - 40°F. available.
Remote Chillers
(MCR Series)
Well suited for operations that have variable
liquid flow needs. No liquid bypass required. Pump, Tank, Refrigeration Coil inside,
Condensing unit outside. Tank and pump assembly is compact in size, for in plant
installations. The condensing unit can be placed on the ground or on the roof.
Refrigeration lines must be run between tank and pump assembly and the condensing unit.
Pre-charged refrigeration line sets are offered as a option. The best of both worlds. Water
inside heat outside. NO FREEZING PROBLEMS. Available in single 2 ton through 20
ton, two stage 6 ton through 40 ton, and three stage 12 through 60 ton. Low ambient
controls for operation down to - 40°F. available.
Inline Chillers (MCI
Series)
Well suited for
operations that have constant liquid flow needs.
Requires 3-way bypass valve installed in system piping. Can be installed inside or
outside. Refrigeration Coil and condensing unit all in one package. Compact in size
(29" x 39" or 32" x 78" foot print). Easily installed hook up liquid
lines and electrical. Requires a pump and expansion tank. Inline Chiller units may be
manifolded together in a multistage operation for larger capacity needs. (If installed
in a freezing location antifreeze must be added to the system). Low ambient controls
for operation down to - 40°F. available.
Inline Chiller
Systems (MCIS Series)
Same as above with tank
and pump. Tank and pump sizes vary with the size of the chiller system. The tank and
pump should be located inside the building if possible. (If installed in a freezing
location antifreeze must be added to the system). Low ambient controls for operation down to - 40°F. available.
Inline Perc. Coolers (MCIPC
Series)
Chills Perc.solvent in a
system that has no need for other chilling. Can be installed inside or outside.
Refrigeration Coil and condensing unit all in one package. Compact in size (29" x
39" or 32" x 78" foot print). Easily installed hook up liquid lines and
electrical. Low ambient controls for operation down to - 40°F. available.
Cooling Tower Assist
Chillers (MCTA Series)
Assists a cooling tower
by adding cooling capacity, with out adding a additional load on the tower. A
refrigeration coil is installed in the remote tank reservoir of the tower and a condensing
unit is installed outside, to add 2 to 20 ton additional capacity. Refrigeration lines
must be run between the coil and condensing unit. Pre-charged refrigeration line sets are
offered as a option. Low ambient controls for operation down to - 40°F. available.
Cooling Tower Booster
Chillers (MCTB Series)
Lowers the Temperature of
water coming out of a cooling tower for specific needs such as solvent cooling or
refrigeration compressors on dry-cleaning machines. Offered in both package and remote
styles. Sizes 2 ton to 20 ton available. Low ambient controls for operation down to -
40°F. available.